SS3 Soft Strip 2.4W, 24V High Output, Standard CRI (65-70+)
- Specification Sheet (.pdf)
- Installation Instructions (.pdf)
- 4 in. Installation Instructions (.pdf)
- L Heat Sink Reflector - Application Note (.pdf)
- Dimming Chart (.pdf)
Soft Strip (SS3) provides high levels of light with warm-white or very warm white LEDs. The 1/2" wide flexible copper strip, with an optically clear protective coating, is sold in 1 ft increments up to 25 ft with easy plug-in connectors on each end. Includes a 6 ft power feed cable. For custom lengths, smaller segments are available in 4 inch increments (sold separately). Use plug-in flexible connectors for making turns and custom configurations.At only 2.4 watts per foot, the 24 volt system dims with a standard electronic lowvoltage dimmer using the TEB-75L-24DC. The system is also dimmable with a 0-10V controller when using a 100 or 200 watt power supply. Self-adhering SS3 mounts to most smooth finished surfaces with the industrial strength 3M tape (provided on back of Strip); some unfinished surfaces may require screw-in mounting clips (sold separately). Designed for indoor, open-air environments, SS3 includes a flexible aluminum heat sink to extend LED life.
Applications:
Indoor Only - Under/above cabinet, cove lighting or accent toe kicks
Lamp:
18 warm-white (3,070K) or very warm-white (2,540K) LEDs per foot
65–70+CRI
Warm White: 161 lumens per foot
Consumes 2.4 watts per foot at 24VDC
18" from counter produces 61 foot candles
Average Lamp Life:
32,000 hours
Power Supply:
75 watt, 120 volt input, 24 volt DC output TEB-75L-24VDC
100 watt, 120 volt input, 24 volt DC output PSB-100W-010-24VDC
200 watt, 120 volt input, 24 volt DC output PSB-200W-010-24VDC
Dimming:
Dimmable with low voltage electronic dimmer using when using TEB-75L-12DC
Lutron: Diva #DVELV-300P; Skylark #SELV-300P;
Maestro #MAELV-600 are recommended
Dimmable with 0-10V dimmer when using PSB-100W-010-24VDC or
PSB-200W-010-24VDC. Lightolier: ZP600FAM120 is recommended
| LENGTH IN FEET |
TOTAL WATTAGE |
| 1 | 3W |
| 2 | 5W |
| 3 | 8W |
| 4 | 10W |
| 5 | 13W |
| 6 | 15W |
| 7 | 18W |
| 8 | 20W |
| 9 | 23W |
| 10 | 25W |
| 11 | 28W |
| 12 | 30W |
| 13 | 33W |
| 14 | 35W |
| 15 | 38W |
| 16 | 40W |
| 17 | 43W |
| 18 | 45W |
| 19 | 48W |
| 20 | 50W |
| 21 | 53W |
| 22 | 55W |
| 23 | 57W |
| 24 | 59W |
| 25 | 60W |
| Mounting Strap: | Straps for mounting SS1 and SS3 Soft Strip on surfaces not compatible with 3M tape (provided on the back of Soft Strip). |
 |
SS-SU U-Strap, Use every 6 to 12 inches. (30 to a bag with #6 ½ wood screws). |
 |
SS-ST Screw Mount Cable Tie Strap, may be used for extra support (30 screws and straps per package). |
 |
SS-MCL Screw In Mounting Clip, mounts beneath strip for added support (10 clips and screws and straps per package). |
Ordering Code
| System | Voltage | Length | Color Temperature | |||
| SS3 | - | 24V | - | 4IN | - | WW |
| SS3 Soft Strip 2.4W per Ft | 24V 24 Volt | 4IN 4 Inch | WW Warm White (3,070K) VW Very Warm (2,540K) |
| System | Voltage | Length in Feet | Color Temperature | |||
| SS3 | - | 24V | - | 25 | - | WW |
| SS3 Soft Strip 2.4W per Ft | 24V 24 Volt | Sold in 1Ft increments up to 25 Ft (Example 25 = 25 Ft) |
WW Warm White (3,070K) VW Very Warm (2,540K) |
