Standoffs
Sloped Ceiling Standoffs
Adjustable standoffs for sloped ceilings feature a cable drop for a clean and minimal look. 12' field cuttable length is adjustable with integral wire grip. Use a standoff every 3' of rail with straight runs, circles and at each corner of a square. For best appearance, place a standoff at every point where two pieces of Monorail 2-Circuit joins together. Recommended to us field cuttable rigid power feed to prevent any swaying. Satin Nickel, polished nickel and antique bronze finish.
Must be used with Edge Lighting Monorail 2-Circuit Slope Ceiling Power Feed Rigid Connectors.
Weight:
.25lb (.11kg)
| System | Length | Finish | ||
| M2S | - | SLA | - | SN |
| - M2S Monorail 2 Circuit Standoff | - SLA 144" (12')(3.6m) Adjustable |
- SN Satin Nickel - PN Polished Nickel - BZ Antique Bronze |
Sloped Ceiling Standoffs
Field cuttable rigid standoff with adapter for sloped ceiling. Use a standoff every 3' of rail. For best appearance, place a standoff at every point where two pieces of Monorail 2-Circuit joins together. Satin Nickel, polished nickel and antique bronze finish.
Must be used with Edge Lighting Monorail 2-Circuit Slope Ceiling Rigid Power Feed Connectors.
Weight:
.26-2.60lb (.12-1.20kg)
| System | Length | Finish | ||
| M2S | - | SL6 | - | SN |
| - M2S Monorail 2 Circuit Standoff |
- SL2 2" (5.1cm) - SL6 6" (15.2cm) - SL12 12" (30.5cm) - SL24 24" (61cm) - SL36 36" (91.4cm) - SL48 48" (122cm) - SL96 96" (243.8cm) - SL__ Custom Length |
- SN Satin Nickel - PN Polished Nickel - BZ Antique Bronze |
T-Bar Clip Standoff
T-Bar Clip for mounting Monorail/Monorail 2-Circuit rigid or adjustable cable standoffs to 9/16" or 15/16" T-Bar grids. Use one for each standoff (Use only if local electrical codes allow). Black or white finish.
Use with rigid or adjustable cable stand-offs.
Weight:
.05 lb (.022 kg))
| System | Slat Size | Finish | ||
| MS | - | TBAR | - | B |
| - M Monorail Standoff | - TBAR 9/16" or 15/16" |
- B Black - W White |
